HUATEC Movable Magnetic Particles Flaw Detector HCDX-1000～5000
Movable Magnetic Particles Flaw Detector HCDX-1000～5000 is
applicable to detect workpieces by AC or DC magnetization. It has
the function of demagnetization, and do not need additional
configuration of demagnetization set.
The instrument comes with rollers, flexible and light. It can be
fixed or move to the workshop or laboratory. The detector is
applied to aviation, machinery, automobile, railway, ships,
pressure vessels and other manufacturing industries. It is suitable
for detecting the part or whole of workpieces, include abnormal
part.
8-bit MCU is adopted as the controller by this magnetic particles
flaw detector, and the continuous regulation of magnetizing current
can be realized through the precise collection of the AC zero
voltage crossing signal and the signal of current regulation. It
has the function of maximum current limit. With the function of
phase controlled, the detector is suitable for both continuous
technique and residual technique.
The current value is displayed on the analog ammeter or digital
ammeter. The prod sets and trigger button are for operating in the
narrow space.
The output current is reduced from the initial value to zero
automatically when demagnetizing. Non-contact switch is adopted for
the equipment.
This detector can be connected to the prod sets (handheld electrode
sets) or spiral cable (flexible coil). Also there are some coils or
electrodes designed for this equipment to become a simple
inspection machine tool as option.
Characteristics:
Movable host machine:
Can be used as the power for circular magnetization
Can be used as the power for longitudinal magnetization
Simple inspection machine tool:
Electrode of circular magnetization
Coil of circular magnetization
Manual adjustment of tail electrode
Stainless steel sink
Stainless steel tank (include spray pump and mixing pump)
Spray gun
Magnetic ink can be reused
Black magnetic particles, red magnetic particles,fluorescent
magnetic particles are supported
UV light as option for fluorescent magnetic particles testing
Technical features:
1. AC magnetization current: 0 ~ 6000A (RMS) continuously
adjustable, short-term intermittent, with phase controlled
function;
2. Automatic demagnetization current: AC 6000A ~ 0 (RMS)
continuously adjustable, demagnetization time < 5 s, it will be
shortened with the decrease of the current;
3. Demagnetization effect: standard load, the remanence is less
than 0.2 mT.
4. Current-carrying capacity (duty cycle): 60% of 0-1500A; 18% of
1500-3000A; and 5% of 3000A-6000A;
5. Output cable: 4*150 mm2 flexible cable;
6. Input power: 460V (two-phase three-wire), 60Hz, the maximum
instantaneous current is about 140A;
7. Overall dimension: about 360(width)
×550(height)×650(depth)mm；(excluding handlebar)；
8. Weight: about 130kg.
Configuration table:
Type Configuration | HCDX-1000 | HCDX-2000 | HCDX-3000 | HCDX-5000 |
| AC magnetization | ● | ● | ● | ● |
| AC current | 0-1000A | 0-2000A | 0-3000A | 0-5000A |
| Half-wave rectified magnetization | | | ○ | ○ |
| AC demagnetization | ● | ● | ● | ● |
| DC demagnetization | ○ | ○ | ○ | ○ |
| Coil | ○ | ○ | ○ | ○ |
| Simple machine tool | | | ○ | ○ |
| Power input | Two phase 380V/50Hz 380V/ 50Hz for 2 wires |
Notes: “●”marked as standard, while “○”marked as option.
