3000mT Automatic Calibration Digital Magnetic Field Strength Meter
Hall Effect Tesla Magnetometer HGS-106
HGS-106 is a handheld digital gauss meter controlled by single chip
microcomputer, which can be used to measure the magnetic induction
intensity of dc magnetic field, radiation magnetic field and other
magnetic fields. The instrument can be carried around, with a wide
range, easy operation and clear LCD display. It has many functions,
such as measuring/peak maintaining, MT/GS unit conversion,
automatic zero adjustment by push button, 300MT/3000MT range
conversion, etc.
Main technical indicators
1. Measuring range: 0~300mT~ 3000mt
2. Frequency range: 10Hz~200Hz
3. Accuracy: 0~100mT 1%, 2% above 100mT (measured in uniform
magnetic field)
4. Resolution: DC×1:0.00 ~ 300.00mT. 0.01mT
DC× 10:0.0 ~ 3000.0mt 0.1mt
5. Measured magnetic field: dc magnetic field (static magnetic
field)
6. Function description: peak maintenance function
Gs (gauss) /mT (millitesla) can be switched freely
7. N/S polarity display during dc measurement. N for positive and S
for negative
8. Display button fast automatic zero
9. Ambient temperature: 5℃~40℃
10. Relative humidity: 20%~80% (no condensation)
11. Power supply: four no.5 batteries are externally connected with
voltage stabilizing power
12. External size: 150mm (L) ×70mm (W) ×30mm (H)
13. Instrument weight: 450g
14. Display mode: 41/2 LCD
15. Display unit: mT/Gs
16. AC/DC switchable
Operation request:
- Magnetic field distribution of material surface
- Working magnetic field produced fro some instrument that as
iron-removing device,magnet-selecting machine, magnet chuck, magnet
spool and demagnetizing coil
- Leakage Magnetic iron-surface
- Do not use the instrument in unappropriate conditions.
If you find the value of testing were error in the status
ofmeasurement,
you could loosened the handle of the probe to adjust the screw of
the resistance tinily.
If don’t ensure that the instrument is operated correctly described
below, there would be error or mistake
Don’t attempt to repair, or disassemble, and any reconstruct this
instrument.
- Use only recommended power accessories.
- Don’t connect the terminals of the outer power supply reversely.
the inner is plus, the outer is minus.
- Don’t drop this instrument or the probe down ground. It’ll be
damaged by strong vibration.
- Do not allow hands or other objects with dirt to touch the probe.
- Avoid using, placing or storing the instrument in places subject to
strong sunlight or high temperature, so as to humidity, water, oil,
rust air, vibration and others.
